KR236E Kress RTKⁿ 24,000 m² robotic lawn mower with OAS (Obstacle Avoidance System)
Redefining precision in lawn care with Kress RTKⁿ technology, the KR236E robotic lawn mower introduces satellite-guided, centimeter-level accuracy without the need for any property-specific stationary antennas. Engineered for expansive landscapes, it manicures areas up to 36,000 m2 with a stripe-perfect finish. Equipped with dual-layer razor sharp blades and obstacle avoidance system, the KR236E operates efficiently under any conditions. Its MAP™ (Mowing Action Plan) and TeamWork™ collaborative technologies provide seamless management of every turf complexity. Learn more › Learn less
- Centimeter-level accuracy without station antenna in your property
- Satellite-guided - no perimeter wire installation
- 35 cm of cutting capacity for efficient coverage of large areas
- Dual-layer razor-sharp blades for dense and overgrown grass
- Integrated obstacle avoidance system
- Multi-zone function with the ability to precisely navigate from one turf area to another
- Systematic coverage in parallel lines for maximum mowing efficiency
- MAP™ (Mowing Action Plan) for advanced path optimization and dynamic adjustment technology
- Dead reckoning for mowing even undershade (weak satellite signal)
- Auto-levelling cutting disc
- Anti-theft protection
- Electronic cutting height adjustment
- TeamWork™ collaborative technology for operating more robots in the same area
- In-Hub drive motor with all terrain wheels
- RBS™ Regenerative Brake System for energy saving
- Equipped with OAS (Obstacle Avoidance System)
Less is more
The new Kress KR236E RTKn robot mower delivers centimeter-level accuracy without additional hardware in your property. No antennas. No beacons. No boundary wires.
Learn more
Precision mowing with RTK
RTK is the state-of-the-art geo-positioning technique that fine-tunes satellite signals for unparalleled accuracy.
Uninterrupted precision under shade
If satellite signals are obstructed by buildings or trees, Kress mowers switch to dead reckoning mode to maintain accurate routing, until a clear satellite connection is available again.
Learn more
Inertial navigation
An inertial navigation system is typically formed of three orthogonal accelerometers and three orthogonal gyroscopes that measure tri-axial linear acceleration and angular velocity, respectively. Inertial navigation, or dead reckoning, is based on motion-sensing devices connected to a computer that constantly computes the position, velocity and orientation of a moving object. For moving objects that rely on external references, e.g. satellite navigation or computer-vision navigation, inertial navigation is used when such external references are temporarily unavailable. Inertial navigation is subject to cumulative errors. Accuracy depends on the precision of its motion-sensing devices and, most importantly, on the algorithm that computes data.
While today we think of dead reckoning in terms of satellite navigation, this term has been around since at least 1613, as recorded in the Oxford English Dictionary. Historically, dead reckoning was a fundamental technique in marine navigation, used to estimate a ship’s position by advancing a known position using estimations of speed and course. Navigators employed clever devices like the ‘chip log’ to gauge a vessel’s speed through the water.
Satellite-guided centimeter-level accuracy
Kress's advanced network of base station antennas transmits precise correction data directly to each mower, ensuring unmatched precision for the cutting of every single blade of grass.
Watch the film
Daily fresh-cut stripes
The new Kress RTKn follows a perfectly parallel line pattern. The result? Impeccably aligned stripes that make your grounds a standout feature of the property. Every day.
Watch the film
Master of complexity
Guided by satellites, the Kress RTKn excels at navigating complex landscapes and follows even the most tortuous paths from one turf area to another.
Watch the film
Engineered for synergy
Multiple robots can coexist and operate in the same territory, ensuring swift and seamless turfcare without overlap or interference.
Stay in control
The Kress app can handle up to 10 robotic mowers simultaneously. For oversight of extensive grounds maintenance operations, the specialized fleet management app is coming early spring.
Kress RTKn for commercial turf care
Discover how transitioning from manned lawn mowing to unmanned turf care will benefit your business.
Learn what Kress can do for you, your business and the planet
Auto-leveling blade system
The floating blade deck automatically adjusts to uneven terrain, ensuring a consistent cut while preventing turf scalping.
Large cutting capacity
The dual-disc ensures efficient coverage of large areas with fewer passes.
Dual-layer razor blades
Engineered on separate planes, the blades effortlessly manage high-density and overgrown grass.
Electronic cut height adjustment
Grass cutting height can be adjusted with a simple slider in the app for a tailored turf finish.
Agility meets precision
Kress Obstacle Avoidance System (OAS) ensures the mower navigates with precision around each challenge the terrain presents.
A future-proof investment
Just like your smartphone, Kress robot mowers get automatic over-the-air updates whenever new software is available.
In-hub gearless motors
Kress direct-drive motors ensure smooth, trouble-free running, season after season.
Washable underbody
IPX5 rated, the chassis is designed to withstand the force of a sustained water jet from a hose, making cleaning quick and easy.
Secure and traceable
Kress robot mowers feature real-time geo-location tracking, offering peace of mind with anti-theft monitoring on your smartphone.
Energy-smart on slopes
Kress robotic mowers capture energy as they descend hills, recycling power back into the battery.
